RS2I - Forum

Don't Blame New World for GPU Deaths

News outlet hardwareluxx has received an official statement from Amazon regarding GPU deaths surrounding its recently released MMO New World. Amazon says they have detected no game-breaking bugs in New World that would cause the game to kill RTX GPUs. Instead, it reiterates and confirms that it's a problem with GPU manufacturers and poor graphics card build quality.To get more news about safe new world gold, you can visit spieltimes.com official website.

This news was also confirmed by custom PC builder, PowerGPU, who told us it has only dealt with customers using older model EVGA GPUs that were dying from New World, including RTX 3090s, a couple of RTX 3080s, and a single 3080 Ti.

"In the last few days, we have received few reports from players who have had problems with their GeForce RTX cards. After extensive investigation, we were unable to identify any unusual behavior on the part of New World that could be the cause of these problems. EVGA has already confirmed errors in the production of some GeForce RTX cards. New World can be played safely. For players who have encountered a hardware failure, we recommend that you contact the manufacturer."
While some might say that of course Amazon would deny culpability, New World should not be blamed for all the GPU deaths despite what everyone might be telling you. EVGA has already confirmed that its first batch of RTX 3090 cards built a year ago had faulty solder joints, which caused the cards to die under the strain of New World — and if it wasn't New World, it would have been some other game or application.

We believe New World's game engine inadvertently stumbled upon some code sequence that allows certain Ampere cards to draw more power than they should. This would explain why only a handful of cards are dying from New World. If the problem was indeed from New World in general, then graphics cards would be dying left and right, including RTX 3070s and RTX 3060s, and Amazon would be able to replicate the issues.

There's also the fact that no gaming laptops have been confirmed KIA from New World either. Laptops of necessity tend to have better power regulation and don't push the limits as hard as factory overclocked desktop cards. There's also something to be said for any hardware design that allows the hardware to be killed by software. If the code can execute, the hardware should constrain any power or thermal loads so that nothing fails.

Frankly, believing Ampere graphics cards — particularly early models — are the main culprit isn't all that difficult. Let's not forget about the issues surrounding poscaps back when the RTX 3090 and RTX 3080 were first released. Many Ampere cards that didn't have enough MLCCs were crashing to desktop thanks to power filtering issues from poscaps. This forced Nvidia to create a new driver update that reduced GPU boost frequencies to stop the graphics cards from crashing while gaming. Future models came out with improved power circuitry, but some of those first run cards are still out in the wild.

What we currently don't know is what other models of RTX 3090s and RTX 3080s met with similar manufacturing defects. We've seen mention of a couple of Gigabyte RTX 3090s cards dying (while playing New World), and according to JayzTwoCents, one Zotac 3090 caught fire while playing the game. PowerGPU, a system builder, also says a single RTX 3080 Ti died, but that's it. All other brands, including MSI, don't seem to have any dead cards at all.

There are supposedly some other cards, including RTX 3080 Ti and RX 6000-series GPUs, that have died from New World. However, that could just be the usual small percentage of cards that inevitably die for one reason or another. Make a million graphics cards and there will always be a few that fail within the first year or two, even under relatively tame use. Basically, correlation doesn't equal causation, and there doesn't appear to be a continued spate of GPU failures while playing New World.

World of Warcraft: The Community Council Explained

The Community Council follows dozens of new issues that have engulfed the World of Warcraft. Since the sexual misconduct and discrimination legal battles were issued against it in July, WoW has been working to correct a number of issues. This includes changing controversial characters, items, and quests. They also removed hints to real-life people who were involved in the scandals. The WoW Community Council is also another way for fans to voice their wishes and requirements to the WoW team.To get more news about buy world warcraft items, you can visit lootwowgold official website.

This initiative has impressed many gamers. Many productive forums have been bustling with interest from the start of the project. The Council members have delivered their thoughts and disagreements with a decorum rarely seen on the web, particularly in World of Warcraft discussions.
However, several gamers are concerned about the forum’s lack of privacy. Members of the committee use the same profiles as their WoW characters, perhaps resulting in griefing and abuse messages from enraged users in the long term. It is too early to tell whether the Community Council will result in long-term improvement, it appears to be accomplishing its goal so far anyway.Feel free to share your thoughts in the comments below. For more content, stay with us, here at Spiel Times.   

The objective of this board is to offer the community a better direct representation and to build connections with the World of Warcraft devs.
The WoW crew will never be able to communicate with all of its millions of users.
They aim to incorporate the Community Council as a platform to engage with that supports all elements of Warcraft’s diverse group by bringing together gamers of various races, creeds, and focuses within the game.

Can I travel to mainland China?

In this series, we answer frequently asked questions about China’s strict zero-tolerance approach to Covid-19 including current entry restrictions, the length of quarantine and which tests travellers have to take. Have a question you want us to tackle? To get more news about China travel advice, you can visit shine news official website.
This story has been made freely available to our readers. Please consider supporting SCMP’s journalism by subscribing.
Since closing its borders to most international travel last year, China has imposed strict lockdowns, mass testing, large-scale contact tracing, quarantines and entry restrictions as part of its zero-tolerance Covid-19 strategy.
The measures look set to continue despite the potential long-term economic impact and the nation’s plans to host international events including the Winter Olympics.Air travel remains the main way of entering the country but international flights to the country are limited. In March last year, China restricted both foreign and Chinese carriers to just one weekly international passenger flight per airline.
The civil aviation authority can suspend flights if there are a certain number of positive Covid-19 cases among a carrier’s passengers, although those rules have been eased this year. If between five and 10 passengers on a flight test positive for the coronavirus, the airline can choose to either suspend their operations for two weeks or continue operating at a maximum of 40 per cent capacity. Previously, they had to suspend operations for one week.
Travel by land and sea has also been restricted since the pandemic started.
China strengthened its control of its land border with Myanmar amid fears over the spread of the Delta variant, and completely closed its land border with Russia last year to contain a spike in cases entering the country from its northern neighbour.
Ferries between Hong Kong, Macau and mainland China have been suspended, as has the high-speed rail link between Hong Kong and Shenzhen and Guangzhou in Guangdong province.Holiday travel to China is generally not allowed but people with special courtesy visas, such as government officials and diplomats travelling for personal reasons, can enter the country. Those from the same group travelling for official purposes on diplomatic and service visas are also allowed in.
China has refused to let foreign students return to the country to resume their studies, and has stopped granting visas to international students except to those from South Korea following a visa agreement last year.
However, it is still possible to enter the country for certain reasons. Mainland Chinese citizens can return home from overseas as long as they test negative for Covid-19 and obtain the health code required to verify this. Meanwhile, foreigners holding valid work, personal and family reunion residence permits are allowed to enter, as are those holding approved visa types such as air crew.

Cryptocurrency ATM Boom Comes to Colombia

While Colombia is not a country that has embraced cryptocurrencies compared to Venezuela or some African countries, it is the country with the second most cryptocurrency ATMs in the Latam region. The reason behind this could be that Colombia has a high percentage of cash usage. This makes cryptocurrency ATMs a very important tool for adoption in the country.To get more news about XMR, you can visit wikibit.com official website.
   Colombia, Crypto ATM Haven
  There is a cryptocurrency ATM boom going on in Colombia right now, being this is the country that hosts the second-highest number of these ATMs in the region. Columbia was in first place until not so long ago, before El Salvador made its bitcoin bet and declared the leading cryptocurrency legal tender. Currently, there are 50 cryptocurrency ATMs in Colombia, but the reasons for this boom are still not clear to some.
  Colombia has not been especially known for its cryptocurrency adoption, and its involvement with cryptocurrencies at a government level was limited to a regulatory sandbox that exchanges are running with banks. However, there seems to be an increasing interest by cryptocurrency ATM companies in offering their services there. This might have to do with the close proximity to Venezuela and the vibrant commercial exchange that happens between these two countries.
  About this, Alejandro Beltrán, CEO of buda, a Latam-based exchange, told Forbes:
  “Colombia continues to be an important crypto hub in transactionality, and as Venezuela is in the top 3 in the global adoption index, the border position makes ATM systems good alternatives for consumers.”
The cryptocurrency ATMs are concentrated mostly in the capital of the country, Bogota, where there are 29. Six are located in Medellín, three in Bucaramanga and Pereira, with the remaining ones being scattered throughout other locations. This clearly shows that most crypto ATMs are concentrated in city areas, away from the borders. This fact seems to rule out transactionality between countries as an important driving force behind the ATM push. However, Beltran has another theory about this boom.
  Colombia is one of the leading countries for cash use in the region, and these ATMs aid customers in managing and transacting funds that would be impossible to do use efficiently with the current limitations of the banking sector in the country. To conclude, Beltran stated:
  “We believe that this can be one of the great contributions of the sector so that the ecosystem continues to grow in a vertical way.”
  For more blockchain news, please download WikiBit - the Global Blockchain Regulatory Inquiry APP.

Fundamental Analysis - EURUSD Gold & Crude Oil: Dollar depreciates

  The US dollar had shown some weakness last week despite the imminent decisions on Tapering. Investors seemed to have forsaken dollar and continued investment in the risky assets including gold and stocks. However with very many Economic data on inflation to come from New Zealand, UK, Canada, and Japan, as well as global Flash PMIs. It is likely that the US dollar will further loose dominance while investors would continue with these risky assets including gold. EURUSD will benefit greatly from this week's Economic reports to ascend from the current support. Crude Oil is currently overbought and may retrace from the current resistance at $82 due to the gradual restoration of Economic activities across the globe.To get more news about ifx broker, you can visit wikifx.com official website.

The US dollar dominance since the month of September had significantly depreciated last week. Despite the imminent November tapering, investors seemed to have neglected it and continued buying higher into stocks, Crypto and other assets. However, there is a greater concern that the US dollar might fall more this new week with Inflation data due out from New Zealand, UK, Canada, and Japan, as well as global Flash PMIs. There will also be a data dump on Monday from China.To get more news about ifx broker minimum deposit, you can visit wikifx.com official website.
  Equally there are other economic events to be released this week that may restrict the US dollar dominance such as the Inflation data to released from New Zealand, Germany, Eurozone, Canada, and Japan. The critical consideration here is: Will higher inflation continue to push funds into risky assets, or will traders fear central bank tapering and cut back on risk？ In addition, China releases Q3 GDP, Industrial Production, Retail Sales and the Unemployment Rate for September. Traders will watch to see if evidence of a China slowdown continues. This will likely push investors to continue investment on the risky assets while forsaking the US dollar to fall lower this new week.To get more news about ifx broker review, you can visit wikifx.com official website.
  Fundamental Analysis and Forecast for EURUSD
  EURUSD is currently staging a positive recovery after a prolonged fall for the past months since July. The market price for Euro had created a strong support at its All time low at 1.151401. The Bulls are currently jumping in to push the price to a higher region. Euro may likely benefit positively from the remarks by the European Central Bank President Christine Lagarde who spoke on Saturday at an International Monetary Fund event. Largarde had hinted that “inflation is largely transitory” and hence, “ECB is committed to preserving favourable financing conditions for all sectors of the economy over the pandemic period.” Optimistically she asserted that “once the pandemic emergency comes to an end — which is drawing closer — our forward guidance on rates as well as asset purchases will ensure that monetary policy remains supportive of the timely attainment of our target.” We therefore expect a positive recovery from EURUSD in the coming weeks. The next target for EURUSD is the resistance at 1.18785
Gold had surrendered a portion of its gains last week after daily retail traders took profits ahead of the weekend. The precious metal is currently seating on a new support awaiting the next Upward movement.
  It is expected that Gold prices would sower higher this new week especially as global economic growth prospects dim all the more. Investors are currently turning towards assets despite the imminent tapering especially as the demand for Gold keeps increasing ahead of the festive season. We hope to see gold retest the previous all time high last week at 1776 and even higher this new week.
Crude oil has maintained a straight line Bullish run up to $82 from the previous resistance at $62 on August 23.
  This is no doubt, the eighth straight week of gains in crude and the highest close since 2014. Despite the fact that the US inventory report this week was bearish yet crude remained unaffected. However, Crude Oil is facing a strong resistance currently and we might see some retracement in the new week due to the revival of Economic activities following a steady recovery from the pandemic.

XD-CNC35 Universal Spring Forming Machine Make Various Precision Tension Springs

XD-CNC35 3-4 axis CNC Universal Spring Machine is applied wire diameter from 1.5mm to 4.0mm, which is mainly suitable for manufacturing various compression springs, extension springs, torsion springs, shaped springs, wire forming and other products. It has totally equiped with four servo motor to drive, including one servo motor for wire feeding, one servo motor for cam moving, one servo motor for quill rotating and the other one is for spinner turning. Among them, the fourth axis is controlled the spinner turning and need to order separately. The machine is widely applied in the industrial field and great recognized and fovored by thousands of spring manufacturers.Get more news about Universal Spring Machine,you can vist our website!

● Machine Feature

◇ It is applied on the production of all types of springs and wire-forms, with high stability and precision.

◇ It adopts Janpanese Sanyo denki servo motor and Taiwan Hust controller, Ensuring stable operation.

◇ Computer can automatically detect the temperature of the motor and slow down the running speed to protect the motor from overheating.

◇ Computer can automatically decelerate according to the timing when the probe should be used.

◇ Production speed can be increased and decreased at any time running the machine.
Our company has been focusing on the field of manufacturing spring making machine more than 20 years and has rich technical experience. At the same time, we focus on technological innovation and personnel training, and have our own professional R & D, sales and service teams.  Company's the Founder Mr Bai has witnessed the Spring Industry development in China, and committed to improving user experience and continuously improving machine quality.
  The company's philosophy is "Quality Priority, Customers First, Keeping Improving", not only just a slogan, but also put into practice.
  Our company's products are great recogized and favored by thousands of spring makers all over the world. Our main market as following:
△ Europe (UK, France, Germany, Italy, Sweden, Romania, Poland, Estonia, Russia, Ukraine, Bulgaria)
△ Africa (South Africa, Egypt, Ethiopia, Nigeria, Tunisia)
△ Asia (Korea, India, Vietnam, Philippines, Singapore, Indonesia, Malaysia, Iran, Thailand, Turkey)
△ South America (Argentina, Brazil, Chile, Peru, Ecuador, Colombia)
△ North America (America, Canada, Cuba, Mexico,Costa Rica)
  We have established customer oriented quality management system, strengthen lasting innovation and enhance after-sale services.

Battery Impact Testing Machine

To test battery safety performance through different hammer and different stress areas from different height. The battery verifies as qualified on the condition of no flames or explosion after this heave impact test. Get more news about Battery Heavy Impact Tester,you can vist our website!

Test Method

Test specimens is placed on a plane. A bar with its diameter at 15.8mm placed on the central position of test specimens in cross direction. A heavy of 9.1kg drop free from a height of 610mm down to the test specimens. Each test specimen have to bear a impact test and each test need different test specimens.

Standard Compliance

1.UL1642 UL standard for safety for lithium batteries

2.UL2054-2005 UL Standard for Safety for Household And Commercial Batteries

3.UN38.3 Lithium metal and lithium ion batteries

.4.GB/T 18287-2013 General specification of lithium-ion battery for cellular phone

5.SJ/T 11169-1998 Standard for lithium batteries

6.YD 1268- 2003 The safety specification and test method for lithium batteries and charger

7.SJ/T 11170-1998 Standard for household and commercial batteries

8.GB/T 2900.11-1988 Terminology of (secondary) cell or battery

9.MT/T 1051-2007 Lithium-ion batteries for cap lamp
Standard configuration with 9.1kg heavy and diameter of 15.8mm crossbar ( to meet different standards) ;Encoder displays the height with intelligent control 0~700mm controllable(easy to operate);

Double column design with the heavy drop free to reduce the friction between the heavy and wall around and ensure an safety.Air vents is designed with to discharge the smell from test room;

Dual- layer explosion-proof viewing glass, explosion chamber with independent controller, easy to operate;

Desktop Waterjet for Prototyping and Low Volume Production

The founders of WAZER© (Brooklyn, NY) built race cars at the University of Pennsylvania and spent hundreds of hours cutting sheet metal by hand because their engineering department did not have a waterjet cutter due to the size and expense. So they built a small waterjet cutting system as a school project. After graduating and spending a couple of years of development at the HAX™ Accelerator (San Francisco, CA), WAZER created their first desktop waterjet cutting system – the only desktop machine that cuts virtually everything, including steel, titanium, aluminum, glass, stone, tile and carbon fiber. Traditional abrasive waterjets cost upwards of $100,000 and are typically too large and messy to fit in most shops. The WAZER system costs $7,500, which is affordable for small businesses and schools who want to iterate quickly on designs without having to spend time and money sending their projects out to be made by an external waterjet service.Get more news about Desktop Waterjet,you can vist our website!

WAZER is also perfect for prototyping and low volume manufacturing in shops that need to keep their large machines running. Its high velocity jet uses a combination of high pressure water and sand-like abrasive particles to cut through the workpiece, achieving a high level of digital precision in a cut area of 12 in x 18 in that is capable of cutting up to ½ in aluminum and ¼ in mild steel. The machine is easy to set up with no special electrical or water requirements. It runs on 110V AC/ 60 Hz and only needs a sink or a hose pipe along with a drain for a water source. Any small workshop with a sink and two outlets is ready to go. The Penn engineering department now owns a waterjet cutter. This waterjet is compact, contained and fully enclosed, making it safe, clean and quiet to operate. Other features include:

The system achieves detail and accuracy that is impossible by hand, while freeing users to complete other tasks.
WAZER costs around $10 an hour to operate, factoring in consumable costs of $8 per hour for the garnet abrasive and $2 per hour for wear on replacement parts like the cutting beds and nozzle assembly.

probably the best UHF Long Range RFID Reader on the market

The XT-5 is the latest, state of the art addition to TagMaster’s XT-series. This new reader is full of the latest technology with several new and updated features. This is the best Long Range RFID reader we have ever built and we dare to say: this is probably the best reader on the market today.Get more news about Long Range Rfid Reader,you can vist our website!

The XT-5 is tailored for automatic vehicle identification applications such as parking, industrial gates, barriers, gated communities, road tolls, etc. The reader is easy to set up and install and is designed for all kinds of environments. And as with all TagMaster readers, it supports all major interfaces and communication protocols.

In addition to the list above the XT-5 has a long list of usage areas and functions. Please, visit us and find out more about this new, impressive reader.

The Zebra MC3390R Integrated Long-Range RFID Handheld Reader brings a new level of efficiency and accuracy to inventory management, order fulfillment, cross-docking, and more. The integrated long-range antenna supports a best-in-class RFID read range, and coupled with Zebra’s high-performance ASIC radio technology, delivers higher throughput, so inventory counts can be accomplished more quickly and accurately. The MC3390R shares the same EMDK and RFID SDK as other Zebra RFID handheld readers and sleds — enabling you to streamline full-fleet rollouts no matter which Zebra products you choose to deploy. With Zebra’s signature rugged design, the MC3390R is built for your semi-industrial environments, yet is lightweight with the right ergonomics for all-day comfort. The large touchscreen, physical keypad, and Android OS deliver an intuitive and flexible platform for your RFID application needs today and tomorrow.

Color Contacts Can Carry Risks

Don't it make my brown eyes blue?" crooned Crystal Gayle of unrequited love. While she may not have meant it literally, nowadays with the help of cosmetic contact lenses, brown-eyed girls can brandish baby-blues if they so choose. But most may be unaware of the potentially costly consequences.To get more news about Green Contacts    , you can visit beauon.com official website.

Cosmetic contacts have quickly become the latest teenage fad. Teens we spoke with in Ohio, New York and Maryland say colored lenses are a kick, whether you need glasses or not. People who have no need for correcting their vision are still donning these lenses, simply for cosmetic purposes.To get more news about Purple Contacts, you can visit beauon.com official website.
Right now they're green," 15-year-old Alaina, whose real eye color is brown, told ABCNEWS' Arnold Diaz. "But I also have a honey color that makes them yellow...depending on what outfit I'm wearing."

Sales of contact lenses are up 20 percent, and manufacturers are targeting the youth market with wild colors and patterns like zebra, ice fire, knockouts, and red hots.To get more news about Purple Contacts, you can visit beauon.com official website.
But what began as a fashion fad is also a potential health hazard. Even cosmetic lenses that have no vision correction in them have to be fitted by an eye doctor. That's the law. But many teens are buying bootleg colored lenses without a prescription from often unlicensed vendors, and taking other risks.

"Did you know that the kids are selling these contact lenses out of their locker at high school?" asks Dr. Thomas Steineman, director of the eye clinic at Cleveland's Metro Health Medical Center in Ohio. "Did you know that kids are dyeing contact lenses in vegetable dyes found in things like Kool-Aid? Did you know that kids are sharing lenses with their friends? That's really dangerous."All contact lenses carry the potential for serious complications. However, some people carry the belief that because colored lenses do not correct vision and are purely cosmetic, they are not as risky to wear without a prescription.

"The fallacy of that logic is that they are made of some of the same materials and they fit on the cornea as a foreign body just like any other contact lens," explains Dr. Gary Foulks, professor of ophthalmology at the University of Pittsburgh Medical Center.

Proper fit and care, which eye care professionals guarantee, can reduce the risk of painful complications. "If [a lens] is too tight, it can squeeze and cause scratches. If it's too loose, it'll roll around and usually falls out," says Dr. Susan Taub, associate professor of ophthalmology at the Northwestern University School of Medicine.

The most serious concern is the risk of infection. "There are bacteria that have a predilection for the eye and can really ravage the eye," says Taub. "They can actually bore a hole in the eye and blind [it]."

Robyn Rouse is one of at least 1,500 people who wound up in emergency rooms last year as a result of contact lens problems. She bought colored lenses without a prescription at a corner grocery store in Cleveland. The 15-year-old says she wore them for one night, took them out and went to sleep.

What is the best face mask to protect from COVID-19?

FFP3 (filtering face piece 3) respiratory masks, known in the U.S. as N99, can reduce transmission of COVID-19 by up to 100 percent, according to a study conducted on hospital wardsTo get more news about famous mask wholesale, you can visit tnkme.com official website.

The data, which were collected in 2020 and have not yet been peer-reviewed, indicated there was a significantly larger chance of hospital staff wearing standard-issue surgical masks catching the virus.

The study by the Cambridge University Hospital NHS Foundation Trust prompted calls for hospital workers in the UK to be issued with the higher standard face covering.

National Guidance currently recommends that healthcare professionals should wear surgical masks, with the exception of a few limited situations.
However, the study found that staff caring for patients on red wards (those with patients who had tested positive for COVID-19) were exposed to a risk of contracting the coronavirus that was up to 47 times higher than those on green or non-COVID-19 wards.When infections were rising rapidly again in December 2020, the protection on wards at the hospital in Cambridge was upgraded to FFP3 masks. In the weeks that followed, the study found the rate of infections among healthcare professionals working on red wards fell to levels experienced by staff on green wards where there were no COVID-19 patients.

The study states: "Cases attributed to ward-based exposure fell significantly, with FFP3 respirators providing 31-100 percent protection (and most likely 100 percent protection) against infection from patients with COVID-19."Fluid-resistant masks were also described as being "insufficient" to protect healthcare workers and any remaining cases on the red ward with the upgraded masks were considered to have been spread in the community as opposed to in the hospital.

Michael Weekes from the Department of Medicine at the University of Cambridge says the data suggest there's "an urgent need to look at the PPE offered to healthcare workers on the front line."

"Upgrading the equipment so that FFP3 masks are offered to all healthcare workers caring for patients with COVID-19 could reduce the number of infections, keep more hospital staff safe and remove some of the burden on already stretched healthcare services caused by absence of key staff due to illness. Vaccination is clearly also an absolute priority for anyone who hasn't yet taken up their offer."

The Cambridge trust is one of 17 institutions across the UK that has decided to upgrade PPE regardless of national policy.