Vous n'êtes pas identifié(e).
What are slip rings with through bore?
Slip rings with through bore are a type of slip ring that have a central hole or bore that runs through the center of the assembly.To get more news about through bore slip ring, you can visit grandslipring.com official website.
This design allows for a rotating shaft or other component to pass through the center of the slip ring without interfering with its operation.
Slip rings with through bore are used in a wide range of applications where rotational movement is required, including rotary tables, wind turbines, and robotics. They are particularly useful in situations where there is limited space for electrical or signal connections and where the rotating component needs to rotate freely and continuously.
Through bore slip rings can be configured with a variety of ring and brush arrangements to accommodate different types of power and signal transmissions, such as power, Ethernet, USB, HDMI, and other data signals. The size of the central bore can also vary depending on the specific application and the size of the rotating component that needs to pass through it.
Overall, slip rings with through bore offer a reliable and efficient way to transmit power and signals between a stationary component and a rotating one while allowing for the free rotation of the rotating component without any interference.
A through-bore slip ring is one in which there is a cylindrical or stepped cylindrical space through its axis . Here is a picture of a through-bore pancake slip ring. A through bore-slip ring will not carry down its axis any other rotary joint, such as a fibre optic, microwave, pneumatic or a hydraulic.
In contrast, a flange-mounted slip ring can carry these additional rotary joints down its axis. The second picture is of a flange-mounted, cylindrical slip ring with an additional rotary joint down its axis.
Through bore slip rings (also known as "through hole slip ring") are slip ring with through bore, this series are designed for being installed with flange on a sleeve bracket, also they totally meet with continuous transmission of power and/or signal under 360 degree unrestrained rotations. This kind of slipring use hollow shaft that applies the best advanced fiber brush technology and precious metal multi-contacting, low noise, low contact pressure and maintenance free. Barlin Times standard through bore size could be from 12.7mm- 190mm are optional, the standard circuits are 6 rings, 12 rings, 18 rings and 24 rings are available, the current can be alternative from 2A-800A. Standardized & modularized design, we could fully customize the best suitable product according to the special requirement of customer in different applications.
Hors ligne