Pages : 1

#1 03-07-2023 05:13:37

pysong
Membre
Inscription : 02-02-2023
Messages : 1 369

Safety Release Lever Load Binders

Safety Release Lever Load Binders


The binder's body independently rotates free of the handle allowing the user to easily and safely release the load, unlike traditional lever binders which can kickback violently when released under tension.Get more news about load binder exporter,you can vist our website!

General Specs
The Safety Release Lever Binder has a yellow powder-coated finish and drop-forged hooks which have size and grade markings forged into the hook.
Operation
Before operating, be sure to check and follow your equipment’s manual and all transportation regulations for the jurisdictions for which you'll be traveling. Check out the Federal Drivers Handbook for Cargo Securement to ensure your cargo is secured correctly for transport.
Attaching Binder
To begin operation, open the lever binder and attach the binder to the binding chain while taking up as much slack as possible.
Removing Binder
Slowly pull upwards on the binder handle until the tension has been released, and then remove the binder from the chain.
Doleco USA, a manufacturer of lifting, sling and load-securing technologies, including the DoNova® PowerLash Textile Lashing Chain, recently introduced a patented DoRa Ratcheting Load Binder.

The new DoRa, which is 20% shorter than a standard load binder, fits into tighter spaces but expands to enable users to reach twice as far as any other. The compact size and extra length of the DoRa save users time and trouble, because they don’t have to detach and reattach chains when periodically retensioning cargo, Doleco said.

Load securement devices commonly slacken as cargo shifts during vehicle movement. Drivers are required to inspect their cargo and its securement before driving their vehicle and after traveling 49.7 miles (80 kilometers) from where the cargo is loaded. Periodic inspections also are mandatory when there is a change in duty status for the driver, the vehicle has been driven more than three hours or the vehicle has been driven for 149.127 miles (240 kilometers).
Regular retensioning of cargo securement chains is a repetitive task for drivers but is crucial to keeping loads safely anchored to their vehicle platforms. But the job of retensioning can become far more cumbersome when a load binder becomes completely retracted. Unable to take up more slack, the user must fully loosen the binder in order to disconnect the chain, extend the spindles for more tensioning distance and then reconnect to a new link in the chain.

Removing the chain from a load binder’s clevis hook for tensioning also can present safety concerns, because at those moments, cargo is no longer fully secure and can become unstable. Cargo instability is of particular concern with loads of logs, pipe and materials with similar characteristics.

Hors ligne

Pages : 1

Pied de page des forums