urwerk ur 1001 fake watches

babyqi · 17-05-2019 04:30:33

Urwerk%20200%20Collection%20UR-202S%20Steel%20watch.jpg

The richard mille sapphire watch movement is very complicated and tasteful. It is the grinding and complicated function of the movement. Although the travel time is not accurate enough, the price is still very high. The cheap Swiss movement has three or four thousand, expensive tens of thousands. . Although the quartz movement is more advanced in technology, but the fans are not very sought after, it does not mean anything, use the battery to go, like a toy. A few dollars cheaper, but only one or two thousand. The famous watch quartz movement has good internal and external shockproof functions. In the quartz watch movement, high-frequency vibrations are generated in tiny synthetic crystal glass, which is then electronically divided to provide the famous internal clock with extremely high accuracy. The required energy is provided by the battery. Some quartz movements are equipped with a low battery display (EOL). When the second hand starts moving every 4 seconds, you must replace the battery within two weeks.

Most automatic movements are driven by eccentric automatic discs. The movement of the arms and wrists causes the automatic disc to rotate, thus winding the mainspring, eliminating the need for a battery. Accuracy depends on strict manufacturing procedures and initial calibration of the movement, as well as the lifestyle of the wearer. However, if there is an appropriate amount of activity, it can be kept on the line and run normally. (It may be slow when walking. The amount of movement may be slow. This is normal. When you use it for the first time, please rotate the crown 20-30 times to make the initial spring. Winding). Although the watch is shockproof, it can easily break the pendulum shaft tip or the wheel axle journal when the impact force of the outside is strong, and the slow and fake richard mille slow needle vibration can affect the travel time.

The astronomical clock is also a type of watch. It is a watch with a movement that has been officially certified by COSC (Contrôle Officiel Suisse des Chronomètres). Certification shows that the movement has passed a series of 15 days of different locations and accuracy tests at different temperatures. Thermal compensation refers to measures taken to measure the actual temperature in the watch to improve the accuracy of the watch. This eliminates a problem that is often encountered, that is, ordinary quartz watches go faster or slower for a few seconds per week due to temperature changes. Only through thermal compensation can the quartz movement meet the high standards set by COSC. The accuracy of the quartz astronomical clock is 20 times that of a conventional quartz watch. For example, its annual error is 10 seconds, which is equivalent to a daily error of only 0.07 seconds.
The Champagne watch movements are available in the above categories, whether it is a lightweight and practical quartz movement, or a complex mechanical movement, can provide accurate timing.

From the initial use of replica swiss watches (one of the movement watchmaking factories in Greentown, Switzerland, many Swiss watches use ETA movements) semi-finished movements, after the independent development of production parts, watch company is designed to operate with care. 80% of the parts are the most popular hand-wound watches of watch watches. At present, only a handful of watchmaking companies can truly design and manufacture movements. Visible watch movement strength, and various movements are definitely a valuable high-cost movement.

watch's own movement, a manual mechanical movement made by watch. The watch brand has always attached great importance to the independent development and production of the movement. Before the movement was put into production, the movement used by watch was improved by ETA 7001, but the transformation was not complete. At the beginning, even the blank machine was used. The core is assembled. However, the Alpha movement, which was later introduced, only used a main splint of the 7001 movement. More than 60% of the parts were produced by watch, which can be counted as the watch self-produced movement.
Inlaid with 17 jewels, it has a good decoration and lubrication effect, which not only makes the watch look more beautiful, but also prolongs the service life of the watch to some extent. The application of the hairspring and the suspension system gives the performance of the movement a powerful guarantee, making the watch more stable and accurate. In addition, in terms of design and grinding, the Alpha movement uses 3/4 splints, blue steel screws, rhodium plating and sun-grain grinding, and the adjustment of the fast and slow needles is also improved according to the standards of high-end watches. ongoing. Therefore, the performance of the replica watches uk movement can be imagined.